ELEGOO Presoldered Nano Board USB-C with Cable Compatible with Arduino 3PC
ELEGOO Presoldered Nano Board USB-C with Cable Compatible with Arduino 3PC
Classic LED Project with Nano Board
This example project shows the simplest thing you can do with an ELEGOO Nano to see physical output: it blinks the on-board LED just like the star in the sky.
Hardware needed for this project:
1 x Nano Board
1 x USB-C Cable
1 x Breadboard
2 x Wires
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328P. The ELEGOO Nano V3.0 is a compact ATmega328P-based controller board designed for breadboard prototyping, embedded electronics and space-limited projects. It lacks only a DC power jack, and works with a USB-C cable instead of a standard one.
You could download the driver of ELEGOO Nano V3.0 from ELEGOO official website.
Package Includes:
3 x Pre-soldered Nano Boards
1 x USB Cable
Note: Only USB-A to USB-C cable is supported; USB-C to USB-C cable is not supported at this time.
PCB Size: 18 × 45 mm
Weight: 7 g
Technical specs:
- Microcontroller: ATmega328P; Architecture: AVR
- Operating Voltage: 5 V;
- Flash Memory: 32 KB of which 2 KB used by bootloader
- SRAM: 2 KB; EEPROM: 1 KB
- Clock Speed: 16 MHz; Analog I/O Pins: 8
- DC Current per I/O Pins: 40 mA (I/O Pins)
- Input Voltage: 7-12 V; Power Consumption: 19 mA
- PWM Output: 6; Digital I/O Pins: 14
ELEGOO UNO R3 Board ATmega328P
|
ELEGOO Tumbller Self-Blancing Robot Car Kit Compatible with Arduino
|
ELEGOO UNO Project Smart Robot Car Kit V 4.0 with Tutorial based on Arduino
|
ELEGOO UNO R3 Project Complete Starter Kit with Tutorial for Arduino (63 Items)
|
ELEGOO Mega Project The Most Complete Starter Kit w/Tutorial for Arduino
|
ELEGOO UNO Project Super Starter Kit with Tutorial for Arduino
|
|
|---|---|---|---|---|---|---|
| Customer Reviews |
5,053
|
316
|
4,503
|
3,489
|
8,022
|
16,627
|
| Price | $16.99 | $84.99 | $59.99 | $59.99 | $65.99 | $42.99 |
| Controller Board | UNO R3 | NANO | UNO R3 | UNO R3 | MEGA | UNO R3 |
| Compatibility with Arduino | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Projects Tutorial Included | ✓ | ✓ | ✓ | ✓ | ✓ | ✓ |
| Assembly Requirement | No | ✓ | ✓ | No | No | No |
| Reasons to Buy | The Same ATmega328P with Arduino UNO R3 Board; the same ATmega16U2 with Arduino | Stand up by itself, Obstacle-Avoidance, Auto-follow | ELEGOO EleRobot APP; FPV Mode; Obstacle Avoidance; Line Tracking Mode | Tutorial of 33 Projects, Complete Stater Kit with UNO R3 | Tutorial of 33 Projects, Powerful Mega R3 Control Board | Tutorial of 24 Projects, Cost-effetive Starter Kit |
- THREE PRESOLDERED USB-C BOARDS FOR MORE PROJECTS - Keep one Nano on a breadboard, embed another in a robot or sensor node and reserve the third for testing; one USB-A to USB-C data cable is included for programming, while jumper wires, sensors and breadboards are sold separately
- ATMEGA328P PERFORMANCE IN A COMPACT FORMAT - Run familiar 5 V, 16 MHz AVR sketches with 32 KB flash, 2 KB SRAM and 1 KB EEPROM, plus 14 digital I/O pins, 6 PWM outputs and 8 analog inputs for LEDs, buttons, displays, sensors, motor drivers and data logging
- CH340 USB SETUP WITH PRACTICAL UPLOAD GUIDANCE - Install the CH340 driver if no serial port appears, select Nano and the correct COM port, then upload a Blink test; use the included USB-A to USB-C cable because the current board 𝐝𝐨𝐞𝐬 𝐧𝐨𝐭 𝐬𝐮𝐩𝐩𝐨𝐫𝐭 𝐔𝐒𝐁-𝐂 𝐭𝐨 𝐔𝐒𝐁-𝐂 𝐡𝐨𝐬𝐭 𝐜𝐚𝐛𝐥𝐞𝐬
- PRESOLDERED HEADERS SAVE BREADBOARD SPACE - The 18 × 45 mm footprint arrives ready to plug into a solderless breadboard, while UART, I2C and SPI support serial modules, displays, storage and sensors without soldering header pins before the first project
- POWER AND MODEL EXPECTATIONS - Use USB-C, 7-12 V VIN or a regulated 5 V input, share ground and drive motors or relays through suitable modules; this classic Nano V3-style board has no Wi-Fi, Bluetooth or features from Nano Every, Nano 33, Nano ESP32 or Nano R4
| Brand | ELEGOO |
| Model Name | Nano V3.0 |
| Ram Memory Installed Size | 2 KB |
| Memory Storage Capacity | 32 KB |
| CPU Speed | 16 MHz |